Samsung GT-N7105T Flash File

5/5 - (1 vote)

Use the link on this page to download the original and tested Samsung GT-N7105T Flash File Firmware (Stock ROM).

Samsung GT-N7105T Flash File (Firmware)

To download the proper firmware, please choose the relevant file according to your mobile device and click the download button below.

File NameN7105TDVUEMK2_N7105TXSAEMK3_XSA.zip
GenreSamsung
PDAN7105TDVUEMK2
CSCN7105TXSAEMK3
Country / RegionAustralia
Size1 GB
Version4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 06 February 2022
File NameN7105TDVUFNL1_N7105TXSAFNL1_XSA.zip
GenreSamsung
PDAN7105TDVUFNL1
CSCN7105TXSAFNL1
Country / RegionAustralia
Size1 GB
Version4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 06 February 2022
File NameN7105TDVUFOC1_N7105TTELFOC1_TEL_4.4.2.zip
GenreSamsung
PDA N7105TDVUFOC1
CSCN7105TTELFOC1
Country / RegionAustralia
Size1.33 GB
Version4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated
06 February 2022
File NameN7105TVJDMB1_N7105TZTADMB1_ZTA.zip
GenreSamsung
PDAN7105TVJDMB1
CSCN7105TZTADMB1
Country / RegionaBrazil
Size1 GB
Version4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 06 February 2022
File NameN7105TVJUENA2_N7105TZTAENA2_ZTA.zip
GenreSamsung
PDAN7105TVJUENA2
CSCN7105TZTAENA2
Country / RegionaBrazil
Size1 GB
Version4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 06 February 2022

How to Flash Samsung GT-N7105T Device?

You need to follow the below steps to flash or install Stock Firmware ROM on your Samsung device.

1. Open Odin Flash Tool

2. Boot your device into Download Mode:

3. Connect your device to the computer (ensure your device should be in download mode).

If you have single file firmware, hit the AP/PDA tab then browse and select a tar.md5 file from the firmware folder.

5. If you have four files firmware then browse and select firmware files:

  • BL: Bootloader
  • AP: Android partition
  • CP: modern firmware
  • CSC: Consumer software customization

6. Next, untick the “Auto Reboot” under the options tab.

7. Finally, click on the start button to begin the flashing process on your device.

Additional Information:

Your device must have at least 30% battery backup to perform the flashing process.

Before flashing your device, take a backup of your data and then proceed to avoid any data loss as the flashing process will wipe all your data.

It’s very important that you flash your device with the correct file. Using the wrong firmware can completely brick your device.

Always flash your device with the correct firmware based on the model and region, wrong firmware can completely brick your device.

If you want to download the official and latest USB Driver for any Samsung device, then head over to the Samsung USB Driver page.

Leave a Comment