Samsung GT-P3110 Flash File

5/5 - (1 vote)

Use the link on this page to download the original and tested Samsung GT-P3110 Flash File Firmware (Stock ROM).

Samsung GT-P3110 Flash File (Firmware)

To download the proper firmware, please choose the relevant file according to your mobile device and click the download button below.

File NameP3110XXALD4_P3110OXXALD4_BGL_4.0.zip
GenreSamsung
PDAP3110XXALD4
CSCP3110OXXALD4
Country / RegionBulgaria
Size638 MB
Version4.0
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 05 February 2022
File NameP3110DDCMA4_P3110ODDCMA4_INU.zip
GenreSamsung
PDAP3110DDCMA4
CSCP3110ODDCMA4
Country / RegionIndia
Size749 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 05 February 2022
File NameP3110XWBLH3_P3110OXXBLH3_MOT_4.0.4.zip
GenreSamsung
PDAP3110XWBLH3
CSCP3110OXXBLH3
Country / RegionSlovenia
Size742 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 05 February 2022
File NameP3110XXDME3_P3110OLBCLL2_XXV_4.1.2.zip
GenreSamsung
PDAP3110XXDME3
CSCP3110OLBCLL2
Country / RegionVietnam
Size769 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 05 February 2022
File NameP3110XXDME3_P3110MEODMF1_MEO_4.2.1.zip
GenreSamsung
PDAP3110XXDME3
CSCP3110MEODMF1
Country / RegionPortugal
Size787 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 05 February 2022
File NameP3110XXDNE4_P3110TURDNE3_TUR_4.2.2.zip
GenreSamsung
PDAP3110XXDNE4
CSCP3110TURDNE3
Country / RegionTurkey
Size999 MB
Version4.2.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 05 February 2022

How to Flash Samsung GT-P3110 Device?

You need to follow the below steps to flash or install Stock Firmware ROM on your Samsung device.

1. Open Odin Flash Tool

2. Boot your device into Download Mode:

3. Connect your device to the computer (ensure your device should be in download mode).

If you have single file firmware, hit the AP/PDA tab then browse and select a tar.md5 file from the firmware folder.

5. If you have four files firmware then browse and select firmware files:

  • BL: Bootloader
  • AP: Android partition
  • CP: modern firmware
  • CSC: Consumer software customization

6. Next, untick the “Auto Reboot” under the options tab.

7. Finally, click on the start button to begin the flashing process on your device.

Additional Information:

Your device must have at least 30% battery backup to perform the flashing process.

Before flashing your device, take a backup of your data and then proceed to avoid any data loss as the flashing process will wipe all your data.

It’s very important that you flash your device with the correct file. Using the wrong firmware can completely brick your device.

Always flash your device with the correct firmware based on the model and region, wrong firmware can completely brick your device.

If you want to download the official and latest USB Driver for any Samsung device, then head over to the Samsung USB Driver page.

Leave a Comment