Samsung GT-S7392L Flash File

5/5 - (1 vote)

Use the link on this page to download the original and tested Samsung GT-S7392L Flash File Firmware (Stock ROM).

Samsung GT-S7392L Flash File (Firmware)

To download the proper firmware, please choose the relevant file according to your mobile device and click the download button below.

Samsung GT-S7392L Flash File
File NameS7392LUBUAML1_S7392LCHFAML1_CHF.zip
GenreSamsung
PDAS7392LUBUAML1
CSCS7392LCHFAML1
Country / RegionChile
Size463 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated23 January 2022
 
File NameS7392LUBUAMI5_S7392LZTOAMI2_ZTO.zip
GenreSamsung
PDAS7392LUBUAMI5
CSCS7392LZTOAMI2
Country / RegionBrazil
Size463 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated23 January 2022
 
File NameS7392LUBUANI2_S7392LUUBANI2_COO.zip
GenreSamsung
PDAS7392LUBUANI2
CSCS7392LUBUANI2
Country / RegionColombia
Size463 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated23 January 2022
 
File NameS7392LUBUANI2_S7392LUUBANI2_UPO.zip
GenreSamsung
PDAS7392LUBUANI2
CSCS7392LUUBANI2
Country / RegionParaguay
Size514 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated23 January 2022
 
File NameS7392LUBUAMI1_S7392LUUBAMI1_TTT.zip
GenreSamsung
PDAS7392LUBUAMI1
CSCS7392LUUBAMI1
Country / RegionTrinidad & Tobago
Size463 MB
Version4.1.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated23 January 2022
 

How to Flash Samsung GT-S7392L Device?

You need to follow the below steps to flash or install Stock Firmware ROM on your Samsung device.

1. Open Odin Flash Tool

2. Boot your device into Download Mode:

3. Connect your device to the computer (ensure your device should be in download mode).

If you have single file firmware, hit the AP/PDA tab then browse and select a tar.md5 file from the firmware folder.

5. If you have four files firmware then browse and select firmware files:

  • BL: Bootloader
  • AP: Android partition
  • CP: modern firmware
  • CSC: Consumer software customization

6. Next, untick the “Auto Reboot” under the options tab.

7. Finally, click on the start button to begin the flashing process on your device.

Additional Information:

Your device must have at least 30% battery backup to perform the flashing process.

Before flashing your device, take a backup of your data and then proceed to avoid any data loss as the flashing process will wipe all your data.

It’s very important that you flash your device with the correct file. Using the wrong firmware can completely brick your device.

Always flash your device with the correct firmware based on the model and region, wrong firmware can completely brick your device.

If you want to download the official and latest USB Driver for any Samsung device, then head over to the Samsung USB Driver page.

Leave a Comment