Samsung SM-C111M Flash File

5/5 - (1 vote)

Use the link on this page to download the original and tested Samsung SM-C111M Flash File Firmware (Stock ROM).

Samsung SM-C111M Flash File (Firmware)

To download the proper firmware, please choose the relevant file according to your mobile device and click the download button below.

File NameC111MUBU1AOI1_C111MUUB1AOD1_ARO.zip
GenreSamsung
PDAC111MUBU1AOI1
CSCC111MUUB1AOD1
Country / RegionArgentina
Size964 MB
Android Version:4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 24 February 2022
File NameC111MUBU1AOI1_C111MUUB1AOD1_BVO.zip
GenreSamsung
PDAC111MUBU1AOI1
CSCC111MUUB1AOD1
Country / RegionBolivia
Size964 MB
Android Version:4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 24 February 2022
File NameC111MUBU1ANG1_C111MUWA1ANG1_PGU.zip
GenreSamsung
PDA C111MUBU1ANG1
CSCC111MUWA1ANG1
Country / RegionGuatemala
Size977 MB
Android Version:4.4.2
Flash ToolOdin Tool
How to FlashFollow Tutorial
Updated 24 February 2022
File Name C111MUBU1AOI1_C111MUUB1AOD1_TPA.zip
GenreSamsung
PDAC111MUBU1AOI1
CSCC111MUUB1AOD1
Country / RegionPanama
Size964 MB
Android Version:4.4.2
Flash ToolOdin Toolac
How to FlashFollow Tutorial
Updated 24 February 2022
File NameC111MUBU1ANI2_C111MUWM1ANI1_TGP.zip
GenreSamsung
PDAC111MUBU1ANI2
CSCC111MUWM1ANI1
Country / RegionParaguay
Size979 MB
Android Version:4.4.2
Flash ToolOdin Toolac
How to FlashFollow Tutorial
Updated 24 February 2022
File NameC111MUBU1AOI1_C111MUUB1AOD1_TTT.zip
GenreSamsung
PDA C111MUBU1AOI1
CSCC111MUUB1AOD1
Country / RegionTrinidad & Tobago
Size964 MB
Android Version:4.4.2
Flash ToolOdin Toolac
How to FlashFollow Tutorial
Updated 24 February 2022

How to Flash Samsung SM-C111M Device?

You need to follow the below steps to flash or install Stock Firmware ROM on your Samsung device.

1. Open Odin Flash Tool

2. Boot your device into Download Mode:

3. Connect your device to the computer (ensure your device should be in download mode).

If you have single file firmware, hit the AP/PDA tab then browse and select a tar.md5 file from the firmware folder.

5. If you have four files firmware then browse and select firmware files:

  • BL: Bootloader
  • AP: Android partition
  • CP: modern firmware
  • CSC: Consumer software customization

6. Next, untick the “Auto Reboot” under the options tab.

7. Finally, click on the start button to begin the flashing process on your device.

Additional Information:

Your device must have at least 30% battery backup to perform the flashing process.

Before flashing your device, take a backup of your data and then proceed to avoid any data loss as the flashing process will wipe all your data.

It’s very important that you flash your device with the correct file. Using the wrong firmware can completely brick your device.

Always flash your device with the correct firmware based on the model and region, wrong firmware can completely brick your device.

If you want to download the official and latest USB Driver for any Samsung device, then head over to the Samsung USB Driver page.

Leave a Comment