Samsung GT-P6800 Flash File

Rate this post

Use the link on this page to download the original and tested Samsung GT-P6800 Flash File Firmware (Stock ROM).

Samsung GT-P6800 Flash File (Firmware)

To download the proper file, please find your model and region below. Then click on the download button. All the files shared on this page are officially released by Company, which has been scanned by the antivirus program.

File NameP6800XXLB4_P6800OXXLB2_XSK_3.2.zip
PDAP6800OXXLB2
CSC3147P6800ODDLP5
Country / RegionSlovakia
Size554 MB
Version 3.2
Flash ToolOdin
How to FlashFollow Tutorial
File NameP6800XXLB4_P6800OXXLB2_XSK_3.2.zip
PDAP6800OXXLB2
CSC3147P6800ODDLP5
Country / RegionSlovakia
Size554 MB
Version 3.2
Flash ToolOdin
How to FlashFollow Tutorial
File NameP6800DXLP8_P6800OLBLP7_XEV_4.0.4.zip
PDAP6800DXLP8
CSC3147P6800OLBLP7
Country / RegionVietnam
Size569 MB
Version4.0.4
Flash ToolOdin
How to FlashFollow Tutorial
File NameP6800DXMD3_P6800OLBMD3_XXV_4.1.2.zip
PDAP6800DXMD3
CSC3147P6800OLBMD3
Country / RegionVietnam
Size730 MB
Version 4.1.2
Flash ToolOdin
How to FlashFollow Tutorial

About Firmware (STOCK ROM)

Flash file is a type of computer software designed to run on a phone and manage hardware, software services. It is used to install or upgrade firmware (operating system of the device).

Firmware files are very useful in fixing a plethora of Android systems like failed updates, hangs on logo or apps crashing. Moreover, they can also be used to unbrick your device if it has been bricked due to software problems and more.

Samsung GT-P6800 Flash File

How to Flash Samsung GT-P6800 Device?

You need to follow the below steps to flash or install Stock Firmware ROM on your Samsung device.

1. Open Odin Flash Tool

2. Boot your device into Download Mode:

3. Connect your device to the computer (ensure your device should be in download mode).

If you have single file firmware, hit the AP/PDA tab then browse and select a tar.md5 file from the firmware folder.

5. If you have four files firmware then browse and select firmware files:

  • BL: Bootloader
  • AP: Android partition
  • CP: modern firmware
  • CSC: Consumer software customization

6. Next, untick the “Auto Reboot” under the options tab.

7. Finally, click on the start button to begin the flashing process on your device.

Additional Information:

Your device must have at least 30% battery backup to perform the flashing process.

Before flashing your device, take a backup of your data and then proceed to avoid any data loss as the flashing process will wipe all your data.

It’s very important that you flash your device with the correct file. Using the wrong firmware can completely brick your device.

Always flash your device with the correct firmware based on the model and region, wrong firmware can completely brick your device.

If you want to download the official and latest USB Driver for any Samsung device, then head over to the Samsung USB Driver page.

Leave a Comment